How to distinguish between nanocrystalline iron cores and ultra-microcrystalline iron cores?

1k101) Fe-based amorphous aluminum alloys (Fe-based amorphous aluminum alloys) Fe-based amorphous alloys are composed of 80% Fe and 20% Si, B chemical elements. It has high saturation state and magnetic induction compressive strength ( 1.54T), the magnetic permeability, excitation current and iron loss are all better than the characteristics of ferrite cores, especially the iron loss is low (1/3-1/5 of oriented silicon steel sheet), replace The use of silicon steel sheet as a power transformer can save 60-70% of environmental protection and energy. The thickness of the amorphous strip of iron-based amorphous alloy is about 0.03mm. It is widely used in power transformers, high-power power transformers, pulse transformers, magnetic amplifiers, intermediate frequency transformers and inverter power cores. It is suitable for frequency applications below 10kHz ( 1k107) Iron-based nanocrystalline aluminum alloy (Nanocrystallinealloy) Iron-based nanocrystalline aluminum alloy is a kind of aluminum alloy which is dominated by iron and added with a small amount of Nb, Cu, Si, and B elements after rapid coagulation processing. Amorphous materials, this kind of amorphous materials can obtain nanocrystallites with a diameter of 10-20nm after heat treatment process, which pervade the amorphous state, and are called nanocrystallites, nanocrystal materials or nanocrystals. crystal material. Nanocrystalline materials have excellent comprehensive magnetic energy: high saturation state magnetic induction (1.2T), high original permeability (8×104), low Hc (0.32A/M), high frequency loss under high magnetic induction is low ( P0.5T/20kHzu003d30W/kg), the resistance is 80μΩ/cm, which is higher than that of permalloy (50-60μΩ/cm), and can obtain high Br (0.9) or low Br value ( 1000Gs). It is the best comprehensive material on the market at this stage; available frequency range: 50Hz-100kHz, best frequency range: 20kHz-50kHz. Widely used in high-power power transformers, variable frequency power supplies, magnetic amplifiers, high-frequency transformers, high-frequency SPWM, high-frequency choke coil cores, voltage transformer cores, leakage protector power switches, and common-mode inductor cores. The microcrystalline iron core is made of microcrystalline strip, the grain size of the strip is several microns, and the ultra-microcrystalline iron core is made of ultra-microcrystalline (also called nanocrystalline) strip, and the grain size of the strip is about 10nm .

Currently there is a global trend growing. People are more conscious about custom transformer manufacturers and are seeking alternatives to traditional solutions.

Want to learn more about custom transformer manufacturers nanocrystalline cores? Check out Transmart Soft Magnetic Materials.

Did I make the right decision? Am I saving money? Would I do it this way again? Yes, yes and yes if you choose to visit Transmart Soft Magnetic Materials and make your enquiry.

Individuals with varied technical skills use nanocrystalline cores in a wide range of applications.