Amorphous core material introduction

Iron-based amorphous alloys: The main elements are iron, silicon, boron, carbon, phosphorus, etc. They are characterized by strong magnetic properties (saturated magnetic induction intensity can reach 1.4-1.7T), soft magnetic properties are better than silicon steel sheets, and they are cheap and most suitable for replacing silicon steel sheets. ), such as distribution transformers, intermediate frequency transformers, high-power inductors, reactors, etc.u200bu200b

Iron-nickel-based amorphous alloys: mainly composed of iron, nickel, silicon, boron, phosphorus, etc., their magnetic properties are relatively weak (the saturation magnetic induction intensity is about 1T or less), the price is relatively high, but the magnetic permeability is relatively high, which can Instead of silicon steel sheet or permalloy, it is used as the core of high-demand medium and low frequency transformers, such as leakage switch transformers.u200bu200b

Cobalt-based amorphous alloys: composed of cobalt, silicon, boron, etc., and sometimes other elements are added in order to obtain some special properties. Due to the cobalt content, they are very expensive and have weak magnetic properties (the saturation magnetic induction intensity is generally 1T Below), but the magnetic permeability is very high, generally used in transformers, inductors, etc. in the military power supply with strict requirements, instead of permalloy and ferrite.u200bu200b

Fe-based nanocrystalline alloys (ultra-microcrystalline alloys): They are composed of iron, silicon, boron and a small amount of copper, molybdenum, niobium, etc., of which copper and niobium are essential elements for obtaining nanocrystalline structures. They are first made into amorphous ribbons and then appropriately annealed to form a mixture of microcrystalline and amorphous structures. Although this material is cheap, it has excellent magnetic properties and is almost comparable to cobalt-based amorphous alloys. It is an ideal material for industrial and civil medium and high frequency transformers, transformers, and inductors, and is also a replacement for permalloy and ferrite. .u200bu200b

Advantages of amorphous alloys
High strength and toughness: significantly higher than traditional steel materials, can be used as composite reinforcement materials, such as fishing rods. In foreign countries, bulk amorphous alloys have been applied to golf racquet heads and micro gears. Amorphous alloy wire may be used in structural parts for strengthening. In addition, amorphous alloys have excellent wear resistance, which, combined with their magnetic properties, enables the manufacture of various magnetic heads.u200bu200b

Excellent magnetic properties: Compared with traditional metal magnetic materials, due to the disordered arrangement of atoms in amorphous alloys, no crystal anisotropy, and high resistivity, it has high magnetic permeability and low loss, which is excellent The soft magnetic materials can replace silicon steel, permalloy and ferrite as transformer cores, transformers, sensors, etc., which can greatly improve transformer efficiency, reduce volume, reduce weight, and reduce energy consumption. The magnetic properties of amorphous alloys are actually the most important application areas of amorphous alloys so far. It can be seen from the figure that the amorphous nanocrystalline soft magnetic alloy has an ideal combination of high saturation magnetic induction intensity and high magnetic permeability. For details, see Applications of Amorphous Alloys.u200bu200b

Flexible processing technology: Compared with other magnetic materials, amorphous alloys have a wide range of chemical compositions, and even the same material can easily obtain the required magnetic properties through different subsequent processing. Therefore, the magnetic properties of amorphous alloys are very flexible, and the choice is very large, which provides convenience for the selection of power electronic components.u200bu200b

Simple manufacturing process, energy saving and environmental protection. Taking traditional thin steel plates as an example, several process links and dozens of procedures are required from steelmaking, casting, ingot blanking, blooming, annealing, hot rolling, annealing, pickling, finishing, and shearing to finished thin plates. Due to many links and complicated processes, traditional iron and steel enterprises are large energy-consuming and polluting households, and are known as 'water tigers' and 'electric tigers'. The manufacturing of amorphous alloys is directly sprayed after steelmaking, and only one step is needed to manufacture the finished thin strips. The process is greatly simplified, saving a lot of valuable energy, and at the same time, there is no pollutant emission, which is very beneficial to environmental protection. It is precisely because of the energy saving in the manufacturing process of amorphous alloys and its excellent magnetic properties that it reduces the loss in the use of transformers, so it is called green materials and materials of the 21st century.
For the study, researchers defined Transmart as strategies to foster some social good, including programs that benefit community engagement, diversity, the environment, human rights and employee relations.
The guiding vision of Transmart Industrial Limited is 'Bringing the best to everyone we touch'. By 'The best', we mean the best products, the best people and the best ideas.
There are so many factors that businesses have to weigh when producing nanocrystalline cores, and we are not going to pretend to grasp all of them.
Transmart Industrial Limited quickly recognized the power of efficient manufacturing and started proactively recruiting people to sell products.