Custom Soft Magnetic Materials and Transformer Core Manufacturers in China

Home   |   INFO CENTER   |  

Nanocrystalline magnetic core, type, application

Nanocrystalline magnetic core, type, application

2022-01-10

Nanocrystalline magnetic core has high permeability, high saturation magnetic induction, low coercivity and low loss. Suitable for EMC / EMI filter, common mode inductance, high frequency transformer, frequency converter, current transformer and other occasions. It has also been widely used in new energy fields, such as solar inverter, wind power generation and so on.


Nanocrystalline magnetic sheet, mobile phone wireless charger magnetic sheet, communication equipment shielding sheet, ultra-thin amorphous nanocrystalline shielding magnetic sheet

Nanocrystalline magnetic sheet has very high magnetic conductivity. It is mainly used for mobile phone wireless charging receiver to shield electromagnetic interference to mobile phone, reduce energy loss and improve charging efficiency. It can also be used in other wireless charging fields, such as automotive wireless charger. The thinnest thickness of nanocrystalline magnetic sheet can reach 0.1mm, and the thickness can also be increased to obtain higher performance. Various sizes and shapes can be customized according to customer needs.


Nanocrystalline core for common mode inductor, high permeability, used for EMC common mode inductor and EMI filter

Nanocrystalline magnetic core has extremely high permeability and wide frequency characteristics. It still has high permeability up to 30MHz high frequency. It is very suitable for EMC filters and common mode inductors to suppress common mode noise. Compared with traditional soft magnetic materials, such as ferrite core, nanocrystalline core has obvious advantages, high inductance, good filtering effect, small volume, less turns of copper wire, high efficiency and energy saving.


Nanocrystalline magnetic core for high frequency transformer

Compared with the boxed magnetic core, the epoxy coated nanocrystalline magnetic core has smaller volume, less copper wires, low copper loss, cost reduction, energy saving and space saving. Suitable for micro filter, common mode inductor, ISDN network transformer, network filter, EMC filter, IGBT / MOSFET drive transformer, HD camera signal transmission transformer / filter.


Special nanocrystalline magnetic core for DC bus of new energy electric vehicle, customized EMC oval amorphous nanocrystalline magnetic core, frequency converter EMI magnetic core

The elliptical nanocrystalline magnetic core is mainly used for common mode filter inductance, which is convenient to pass directly through the bus. It is mainly used between frequency converter and motor to filter high-frequency noise to protect frequency converter and motor bearing. It is widely used in new energy electric vehicle powertrain and charging station.


Nanocrystalline magnetic stripe

Nanocrystalline block core. The nanocrystalline block is made of 25 micron thick nanocrystalline belt. The nanocrystalline block has the characteristics of low core loss and high permeability. It is suitable for high-frequency transformers, inductors, sensors and wind turbines.


Nanocrystalline C-type magnetic core

Nanocrystalline C-core, amorphous C-core upgraded product, with high saturated magnetic flux density, low coercivity, low core loss, very low noise and high frequency up to 20kHz, suitable for main transformer, output inductor and boost PFC choke. It can replace ferrite core. The size can be customized.


Amorphous nanocrystalline cutting and open air gap magnetic core


Chat Online 编辑模式下无法使用
Leave Your Message inputting...