Plastic fiber optic fast ethernet switch
Plate (BH-1078) is a type of wallplate
On the front of the plate: 3 ports of 10/100Mbps RJ-45 for connecting to the network.
The front plate
On the rear of the plate:3 data indicator light
The rear plate
2.Instruction of indicator light
The data indicator light
These blue indicator lights are used for monitoring the working state and fault. Details are as follows:
|LED indicator light||state||description||remark|
|Link/Act||on||No device is connected to the right port|
|scintillation||Date is in transmission|
IEEE 802.3u Fast Ethernet
IEEE 802.3x full duplex model flow control
|Network output port||1×100Mbps POF Optic Lock port,650nm|
|Network input port||3×100Mbps RJ45 port|
|Suitable cable||Φ2.2mm Twice core POF|
|Power source||Alternating current 100V~240V|
|Temperature|| Working:0ºC~50ºC |
|Humidity||Working:10%~90%(non condensation condition)|
|Store:10%~90%(non condensation condition)|
|Transmission distance||POF: ≤80m|
650nm POF is the media of data input port. Network data port can support broadband Network access, Net-language, and Net- TV ect. Because of the MDI/MDIX function, no matter what Network device connected , the switch can STP/UTP twisted pair net-wire via the common 5 kinds,super 5 kinds ,neither to distinguish parallel line and cross line, nor to require net device offer UPLINK port.
Wall-switch Network Accessing:
5.Electric cable and POF port connection
Preparations before installation:
Ø Check the inner shell, if there is some leaking water, you should make process immediately and correspondingly.
Ø Make sure the POF and POF cable left in the shell are enough to install the switch.
Ø Connect with care , check each port is connected correctly and fixed with screw.
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.