Introduction to the types and uses of nanocrystalline cores

Nanocrystalline cores have high permeability, high full magnetic induction, low coercivity and low loss. Suitable for EMC/EMI filter common mode inductors, high frequency transformers, frequency converters, current transformers and other occasions. In the field of new energy, such as solar inverters, wind power and other occasions have also been widely used.u200bu200b

Nanocrystalline magnetic sheet has extremely high magnetic permeability. It is mainly used for mobile phone wireless charging receiver to shield electromagnetic interference to mobile phones, reduce energy loss and improve charging efficiency. It can also be used in other wireless charging areas, such as car wireless chargers. The thinnest thickness of the nanocrystalline magnetic sheet can reach 0.1mm, and the thickness can also be increased to achieve higher functions. Various standards and shapes can be customized according to customer needs.u200bu200b

Nanocrystalline cores for common mode inductors, high permeability, for EMC common mode inductors, EMI filters. The nanocrystalline magnetic core has extremely high magnetic permeability, wide frequency characteristics, and still has high magnetic permeability until the high frequency of 30MHz. Ideal for EMC filters, common mode inductors, to suppress common mode noise. Compared with traditional soft magnetic materials, such as ferrite cores, nanocrystalline cores have obvious advantages, high inductance, good filtering effect, small size, fewer copper turns, and high efficiency and energy saving.u200bu200b

Compared with boxed cores, epoxy-coated nanocrystalline cores are smaller in size, require less copper wires, lower copper losses, reduce costs, save energy and save space. Suitable for micro filter common mode inductor, ISDN network transformer, network filter, EMC filter, IGBT/Mosfet drive transformer, HD camera signal transmission transformer/filter. Special nanocrystalline magnetic core for DC bus of new energy electric vehicle, customized EMC elliptical amorphous nanocrystalline magnetic core, frequency converter EMI magnetic core The elliptical nanocrystalline magnetic core is mainly used for common mode filter inductance, which is convenient to pass directly through the busbar. It is mainly used between the inverter and the motor to filter out high-frequency noise to protect the inverter and motor bearings. It is widely used in new energy electric vehicle powertrains and charging stations.u200bu200b

Nanocrystalline block core, the nanocrystalline block is made of 25 micron thick nanocrystalline ribbon, the nanocrystalline block has the characteristics of low core loss and high magnetic permeability, suitable for high frequency transformers, inductors, sensors, wind power generation machine. Nanocrystalline C-core, amorphous C-core upgrade product, with high full magnetic flux density, low coercivity, low core loss, extremely low noise, high frequency up to 20KHz, suitable for main transformer, output inductor, boost PFC choke coil. Alternative to ferrite cores. Standard can be customized.u200bu200b

Amorphous and nanocrystalline air gap magnetic cores, suitable for high current output inductors, PFC choke coils, differential mode choke coils, Hall effect sensor concentrators, with full magnetic flux density and low core loss Benefit. Low cost replacement for high cores.
There are many issues that affect custom transformer manufacturers, which has led to the need of getting specialists trained in certain areas so as to handle all issues that may arise as well as nanocrystalline cores products that can solve custom transformer manufacturers problems.
With all the pros and cons of different in mind, click Transmart Soft Magnetic Materials to learn more about and decide which nanocrystalline cores option is best for your case.
Transmart Industrial Limited, which prides itself on nanocrystalline cores for applying in different ways.